Text Box: Avatar Custom Electronics Utility Audio System Model: UAS-10A / B Powered Audio Speaker Powered near-field audio monitor. Small cast aluminum enclosure with high compliance 3.5" speaker provides clear audio output in the critical speech frequencies between 300 Hz and 8 kHz. 24 V.D.C. power and balanced audio signal are input on one XLR 4 pin or MIL PT07A 5pin Amphenol connector. In the field, its small size and one connection simplify hook-up and tear down. Lightweight, the UAS-10 can be hung with Velcro from anywhere within the tent or set on tables for close monitoring. Designed to give good performance even with power variations as low as 10VDC or as high as 35VDC. Ease of connection and the ability to be placed anywhere in the control environment makes the UAS-10 speaker an exceptional all-purpose audio monitor. Volume knob is protected from impact by a guard that also prevents accidental turning. Cast aluminum cabinet is painted flat green. Speaker is protected from sand by a 230 mesh cloth monofilament. Specifications Power Input 24V.D.C. Power Input Range continuous stable operation 10 to 35 V.D.C. I mA less than 750 MA avg. I mA Max output at hard clip freq. @1khz 900 MA I mA Max Clip Onset output at onset clip freq. @1khz 793 MA Over voltage power supply safe operation up to 35VDC continuous Under voltage power supply operational (with lower audio output) down to 10VDC Input Bal. isolation transformer 600 ohm Input Sensitivity control @ CW full 1khz sine .31vrms input = 12.6 Watts RMS out Distortion less than .1 %@ 1khz @ 12.0 Watts RMS out Output Power clip onset less than 1%distortion 14.0 Watts RMS Output Power Max output clipped 19.6 Watts Connector: UAS-10A XLR4-M UAS-10B PT07A Dimensions: 4.625”W x 5.5”H x 3.1875”D If you need assistance concerning this product send your inquiry to: UAS-10B audio speaker.UAS-10 Connector.Text Box: info@avatarresearch.com

Inquiry Email:
Text Box: Back To Custom Services